How to Use Your G-Stamp

1. Remove bottom protective cap from G-Stamp and place ink pad aside.
2. Hold G-Stamp with finger dials facing up and away from you.
3. Start from right to left to set 4-letter combination (if less than 4 letters is desired leave remaining dials on a blank).
4. Open ink pad and ink tray and remove silver cover.
5. Place ink pad in the space provided at the bottom of G-stamp and pull ink cover open.
6. Press down on G-stamp several times to transfer ink to letters.
7. Place golf ball in device and press down with pressure to transfer ink to ball. Make sure to hold device steady to avoid smearing.
8. Remove ball and allow 2 minutes to dry.
9. Close ink tray and place bottom protective cap on device.
10. To lock closed, press device down and press both side bottoms in and device will lock.

Important!

Close stamping ink pad tray immediately after use.